Rhobic
LearnBlogDomainsCalculatorsContact
Calculators

App-note math, without the app note.

These distill formulas from motor, power, and gate driver design references into quick, interactive tools. Everything runs in your browser — nothing is sent to a server.

Bootstrap Capacitor

Bootstrap capacitor sizing by charge balance, then droop, hold-up time, recharge and inrush checks for the parts you pick.

gate driverpower

Buck / Boost Converter

Inductor, output capacitor with ESR, peak and RMS currents, stresses and the DCM boundary for a buck or boost stage.

powerconverter

Stepper Motor Current & Torque

Corner speed, current rise and an estimated torque–speed curve for a stepper on a chopper driver.

motorsstepper

BLDC Commutation Timing

Six-step timing: electrical frequency, PWM periods per step, latency as an angle, and back-EMF headroom.

motorsbldc

Encoder Resolution & Speed

Counts and angle per count, speed measurement by counting or timing edges, and encoder and counter speed limits.

motorsfeedback

Bulk Capacitor

DC-link bank sizing for a motor drive: ripple current, harness resonance and stability, hot-plug, load step, and regen.

powermotors

CLLC Resonant Converter

Tank design, gain curve, tank current and ZVS check, circuit diagram, parts breakdown and signal I/O for a bidirectional CLLC converter.

powerconverterresonant
Rhobic

Notes, tools, and open code on motors, motion control, power, and embedded systems.

BlogDomainsCalculatorsServicesCode on GitHub ↗hello@rhobic.com

© 2026 Rhobic. All rights reserved.